With pressed cages - JTEKT Corporation(Koyo)

??

CAD Model seçimi

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Malzeme listesi	SD Inside Diameter [mm]	D Outside Diameter [mm]	B Bearing Width [mm]	R Radius [mm]	ORDER Bearing No. ⁿ/ₐ	CR Basic dynamic load rating [kN]	COR Basic static load rating [kN]	CU Fatigue limit load [kN]	NG Limiting speeds (grase) [rpm]	NO Limiting speeds (oil) [rpm]

		7200BDT	10	30	18	0.6	7200BDT	10.1	5.05	0.260	14000	18000
		7200DT	10	30	18	0.6	7200DT	11.0	5.45	0.280	18000	23000
		7200CDT	10	30	18	0.6	7200CDT	11.8	5.85	0.300	25000	34000
		7300DT	10	35	22	0.6	7300DT	18.9	8.60	0.680	16000	21000
		7201BDT	12	32	20	0.6	7201BDT	15.1	7.50	0.530	12000	17000
		7201DT	12	32	20	0.6	7201DT	16.2	8.05	0.620	17000	21000
		7201CDT	12	32	20	0.6	7201CDT	17.2	8.55	0.670	24000	32000
		7301DT	12	37	24	1.0	7301DT	22.7	10.5	0.820	16000	19000
		7202BDT	15	35	22	0.6	7202BDT	15.1	7.85	0.520	11000	15000
		7202DT	15	35	22	0.6	7202DT	16.4	8.55	0.600	15000	19000
		7202CDT	15	35	22	0.6	7202CDT	17.6	9.15	0.680	20000	28000
		7302DT	15	42	26	1.0	7302DT	27.3	14.4	1.10	12000	16000
		7203BDT	17	40	24	0.6	7203BDT	19.0	10.1	0.660	9600	13000
		7203DT	17	40	24	0.6	7203DT	20.6	11.0	0.770	13000	16000
		7203CDT	17	40	24	0.6	7203CDT	22.1	11.8	0.880	18000	24000
		7303BDT	17	47	28	1.0	7303BDT	30.1	16.2	1.15	8800	12000
		7303CDT	17	47	28	1.0	7303CDT	32.2	16.8	1.30	16000	21000
		7303DT	17	47	28	1.0	7303DT	32.5	17.5	1.30	12000	14000
		7204BDT	20	47	28	1.0	7204BDT	28.6	16.8	1.10	8000	11000
		7204DT	20	47	28	1.0	7204DT	31.2	18.3	1.25	11000	13000
		7204CDT	20	47	28	1.0	7204CDT	33.4	19.6	1.45	15000	20000
		7304BDT	20	52	30	1.1	7304BDT	35.2	19.3	1.35	8000	10000
		7304DT	20	52	30	1.1	7304DT	38.0	20.8	1.60	10000	13000
		7304CDT	20	52	30	1.1	7304CDT	40.3	22.2	1.75	14000	19000
		7205BDT	25	52	30	1.0	7205BDT	29.9	18.8	1.15	7300	9600

Additional Information

Bunu görüntüleyen kullanıcılar da ilgilendi

JTEKT Corporation(Koyo)

Cylindrical bore

Cylindrical boreJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Open, With filling slot

Open, With filling slotJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Shielded ZZJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

Sealed 2RSJTEKT Corporation(Koyo) 16.01.2019

NTN Corporation

Tandem arrangement DT

Tandem arrangement DTNTN Corporation 17.10.2023

JTEKT Corporation(Koyo)

With pressed cage

With pressed cageJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With pressed cages

With pressed cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With machined cages

With machined cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With machined cages

With machined cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With flat back faces

With flat back facesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With machined cage

With machined cageJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

TDO typeJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With pressed cages

With pressed cagesJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With machined cages

With machined cagesJTEKT Corporation(Koyo) 16.01.2019