With pressed cage - JTEKT Corporation(Koyo)

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Bill of material	SD Inside Diameter [mm]	D Outside Diameter [mm]	B Bearing Width [mm]	R Radius [mm]	ORDER Bearing No. ⁿ/ₐ	CR Basic dynamic load rating [kN]	COR Basic static load rating [kN]	CU Fatigue limit load [kN]	NG Limiting speeds (Grease) [rpm]	NO Limiting speeds (Oil) [rpm]

		7200B	10	30	9	0.6	7200B	6.20	2.50	0.130	17000	23000
		7200	10	30	9	0.6	7200	6.75	2.75	0.140	23000	29000
		7200C	10	30	9	0.6	7200C	7.25	2.95	0.150	32000	43000
		7300	10	35	11	0.6	7300	11.6	4.30	0.340	21000	26000
		7201B	12	32	10	0.6	7201B	9.30	3.75	0.270	16000	21000
		7201	12	32	10	0.6	7201	10.0	4.05	0.310	21000	27000
		7201C	12	32	10	0.6	7201C	10.6	4.30	0.330	30000	40000
		7301	12	37	12	1.0	7301	14.0	5.25	0.410	19000	24000
		7202B	15	35	11	0.6	7202B	9.30	3.95	0.260	14000	19000
		7202	15	35	11	0.6	7202	10.1	4.25	0.300	19000	23000
		7202C	15	35	11	0.6	7202C	10.8	4.55	0.340	26000	34000
		7302	15	42	13	1.0	7302	16.8	7.20	0.550	16000	20000
		7203B	17	40	12	0.6	7203B	11.7	5.05	0.330	12000	16000
		7203	17	40	12	0.6	7203	12.7	5.50	0.380	16000	20000
		7203C	17	40	12	0.6	7203C	13.6	5.90	0.440	23000	30000
		7303B	17	47	14	1.0	7303B	18.5	8.10	0.570	11000	14000
		7303C	17	47	14	1.0	7303C	19.8	8.40	0.650	20000	26000
		7303	17	47	14	1.0	7303	20.0	8.75	0.660	14000	18000
		7204B	20	47	14	1.0	7204B	17.6	8.40	0.550	10000	13000
		7204	20	47	14	1.0	7204	19.2	9.15	0.640	13000	17000
		7204C	20	47	14	1.0	7204C	20.6	9.80	0.730	19000	25000
		7304B	20	52	15	1.1	7304B	21.7	9.65	0.680	10000	13000
		7304	20	52	15	1.1	7304	23.4	10.4	0.790	13000	16000
		7304C	20	52	15	1.1	7304C	24.8	11.1	0.860	18000	24000
		7205B	25	52	15	1.0	7205B	18.4	9.40	0.580	9600	12000

Additional Information

Users who viewed this, were also interested in