TA - Thrust Washer - DAIDO METAL

??

Selección de modelo CAD

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Lista de materiales	CNSORDERNO Parts No. ⁿ/ₐ	ID Bushing Inner Diameter [mm]	OD Outer Diameter [mm]	T Thickness [mm]	TT Thickness Tolerance [mm]	PCD Assembling Hole P.C.D. [mm]	H Assembling Hole-Number of hole [mm]	CS Assembling Hole- Countersunk Screw [mm]	A Chamfer [mm]	B Chamfer [mm]

		TA1003	TA1003	10.2	30	3	0/-0.1	20	2	M3	1.5	0.3
		TA1203	TA1203	12.2	40	3	0/-0.1	28	2	M3	2.0	0.4
		TA1203N	TA1203N	12.2	40	3	0/-0.1	-	-	-	2.0	0.4
		TA1303	TA1303	13.2	40	3	0/-0.1	28	2	M3	2.0	0.4
		TA1403	TA1403	14.2	40	3	0/-0.1	28	2	M3	2.0	0.4
		TA1503	TA1503	15.2	50	3	0/-0.1	35	2	M3	2.0	0.4
		TA1603	TA1603	16.2	50	3	0/-0.1	35	2	M3	2.0	0.4
		TA1603N	TA1603N	16.2	50	3	0/-0.1	-	-	-	2.0	0.4
		TA1803	TA1803	18.2	50	3	0/-0.1	35	2	M3	2.0	0.4
		TA2005	TA2005	20.2	50	5	0/-0.1	35	2	M5	2.5	0.4
		TA2505	TA2505	25.2	55	5	0/-0.1	40	2	M5	2.5	0.4
		TA3005	TA3005	30.2	60	5	0/-0.1	45	2	M5	2.5	0.4
		TA3505	TA3505	35.2	70	5	0/-0.1	50	2	M5	2.5	0.4
		TA4007	TA4007	40.2	80	7	0/-0.1	60	2	M6	3.0	0.5
		TA4507	TA4507	45.2	90	7	0/-0.1	70	2	M6	3.0	0.5
		TA5008	TA5008	50.3	100	8	0/-0.1	75	4	M6	4.0	0.7
		TA5508	TA5508	55.3	110	8	0/-0.1	85	4	M6	4.0	0.7
		TA6008	TA6008	60.3	120	8	0/-0.1	90	4	M8	5.0	0.9
		TA6508	TA6508	65.3	125	8	0/-0.1	95	4	M8	5.0	0.9
		TA7010	TA7010	70.3	130	10	0/-0.1	100	4	M8	5.0	0.9
		TA7510	TA7510	75.3	140	10	0/-0.1	110	4	M8	5.0	0.9
		TA8010	TA8010	80.3	150	10	0/-0.1	120	4	M8	5.0	0.9
		TA9010	TA9010	90.5	170	10	0/-0.1	140	4	M10	5.0	0.9
		TA10010	TA10010	100.5	190	10	0/-0.1	160	4	M10	5.0	0.9
		TA12010	TA12010	120.5	200	10	0/-0.1	175	4	M10	5.0	0.9

Additional Information

Los usuarios que vieron esto, también se interesaron en