RS50 - Tsubakimoto Chain Co.

??

Selección de modelo CAD

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10

		LINA Lista de materiales	CNSORDERNO Order number ⁿ/ₐ	Z Number of teeth ⁿ/ₐ	DMIN Diameter of shaft hole min [mm]	DMAX Diameter of shaft hole max [mm]	DH Diameter of hub [mm]	L Length of hub [mm]	DO Outer diameter [mm]	DP Pitch circle diameter [mm]	T Tooth width [mm]	TYPE Type ⁿ/ₐ

		RS50-1B9TQ-SR	RS50-1B9TQ-SR	9	9.5	12	26	25	53	46.42	8.9	Machined
		RS50-1B10TQ-SR	RS50-1B10TQ-SR	10	9.5	16	31	25	58	51.37	8.9	Machined
		RS50-1B11TQ-SR	RS50-1B11TQ-SR	11	12.7	20	36	25	64	56.35	8.9	Machined
		RS50-1B12TQ-SR	RS50-1B12TQ-SR	12	12.7	23	41	25	69	61.34	8.9	Machined
		RS50-1B13TQ-SR	RS50-1B13TQ-SR	13	12.7	27	46	25	74	66.34	8.9	Machined
		RS50-1B14TQ-SR	RS50-1B14TQ-SR	14	12.7	31	51	25	79	71.34	8.9	Machined
		RS50-1B15TQ-SR	RS50-1B15TQ-SR	15	12.7	35	56	25	84	76.35	8.9	Machined
		RS50-1B16TQ-SR	RS50-1B16TQ-SR	16	12.7	38	61	25	89	81.37	8.9	Machined
		RS50-1B17TQ-SR	RS50-1B17TQ-SR	17	12.7	43	66	25	94	86.39	8.9	Machined
		RS50-1B18TQ-SR	RS50-1B18TQ-SR	18	12.7	46	71	28	100	91.42	8.9	Machined

Additional Information

Los usuarios que vieron esto, también se interesaron en