KBK/LL-A - Safety Coupling with Outer Cone and 2 Ball Bearings - KBK Antriebstechnik

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10

		LINA Bill of material	SIZE Size ⁿ/ₐ	L Length (±2) [mm]	L3 Length [mm]	D Outer Diameter [mm]	D3 Centering Diameter(g6) [mm]	D4 Pitch Circle Diameter [mm]	D5 Flange Diameter [mm]	S Disengagement Travel ⁿ/ₐ	IG Thread(6x) [mm]	F Screw (ISO 4017) ⁿ/ₐ	TA Tightening Torque [Nm]	CNSMASSEXACT Mass [kg]	J Moment of Inertia [kg cm^2]	RPM Speed max. [1/min]

		KBK/LL-A-10-5-3Nm-C-1	10	47.5	15	49	37	42	47	0.7	M3	M3	2.1	0.21	0.5	12000
		KBK/LL-A-30-12-5Nm-C-1	30	63.0	20	64	47	53	60	1.2	M4	M5	5.9	0.62	2.6	9400
		KBK/LL-A-60-15-13Nm-C-1	60	83.0	26	79	62	69	75	1.2	M5	M5	8.7	1.16	7.1	7800
		KBK/LL-A-80-20-15Nm-C-1	80	84.5	27	94	68	80	90	2	M6	M6	15	1.97	17.0	6400
		KBK/LL-A-150-20-50Nm-C-1	150	84.5	27	94	68	80	90	2	M6	M6	15	1.97	17.0	5500
		KBK/LL-A-200-20-30Nm-C-1	200	93.5	28	109	80	90	105	2	M6	M6	15	2.30	27.0	5500
		KBK/LL-A-300-25-60Nm-C-1	300	103.5	31	119	90	102	115	2	M8	M8	25	3.70	56.0	5000
		KBK/LL-A-500-35-80Nm-C-1	500	109.0	31	129	100	112	125	2	M8	M8	36	5.30	95.0	4500
		KBK/LL-A-800-50-260Nm-C-1	800	141.0	38	169	110	125	165	2	M12	M12	85	15.00	438.0	3500
		KBK/LL-A-1400-50-450Nm-C-...	1400	141.0	38	169	110	125	165	2	M12	M12	115	15.00	438.0	3500

Additional Information

Users who viewed this, were also interested in

WKM - Metric sizes, Standard – iglidur® W300; extreme wear resistance

WKM - Metric sizes, Standard – iglidur® W300; extreme wear resistanceigus 19.01.2021

DryLin® SHT - Basic

DryLin® SHT - Basicigus 12.09.2022

DryLin® SHTC-HYD - Hygienic design

DryLin® SHTC-HYD - Hygienic designigus 12.09.2022

STZ-Q10-AR-1012-16 - Adapter for flange end support

STZ-Q10-AR-1012-16 - Adapter for flange end supportigus 01.05.2020

QWE - Bearing carriage, adjustable

QWE - Bearing carriage, adjustableigus 13.09.2022

DryLin® TK-01... HKA - Manual clamping | mm

DryLin® TK-01... HKA - Manual clamping | mmigus 08.09.2022

DryLin® TKA-01 - Automatic | mm

DryLin® TKA-01 - Automatic | mmigus 08.09.2022

J350FRM - Trapezoidal lead screw nuts with flange

J350FRM - Trapezoidal lead screw nuts with flangeigus 13.09.2022

SWM - Steel Shaft, mm

SWM - Steel Shaft, mmigus 12.09.2022

GERMK - Metric sizes, right-hand thread, with clevis pin and circlip

GERMK - Metric sizes, right-hand thread, with clevis pin and circlipigus 19.01.2021

KBLI - Inch sizes, left-hand thread

KBLI - Inch sizes, left-hand threadigus 19.01.2021

N 17 - Low-Profile Linear Guideigus 08.09.2022

WGRM LC - Winkelgelenk, metrische Abmessungen, Rechtsgewinde, Low-Cost

WGRM LC - Winkelgelenk, metrische Abmessungen, Rechtsgewinde, Low-Costigus 19.01.2021

ECLM - Metric sizes

ECLM - Metric sizesigus 19.01.2021