Catalog navigation

English	日本語

DM Series

Селекция на CAD модел

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Списък на материалите	CNSORDERNO Parts No. ⁿ/ₐ	ID Bushing Inner Diameter [mm]	IDH Recommended Housing Inner Diameter [mm]	IDT Recommended Housing I.D. Tolerance [mm]	SD Recommended Shaft Diameter [mm]	SDT Recommended Shaft Diameter Tolerance [mm]	IDB Bushing Inner Diameter [mm]	IDBT Bushing Inner Diameter Tolerance [mm]	OD Bushing Outer Diameter [mm]	ODT Bushing Outer Diameter Tolerance [mm]	L Bushing Length [mm]	LT Bushing Length Tolerance [mm]	COD Chamfer on O.D. [mm]	CID Chamfer on I.D. [mm]

DM101610	DM101610	10.0	16	H7(+0.018/0)	10.0	h7(0/-0.015)	10.0	C7(+0.095/+0.080)	16	r6(+0.034/+0.023)	10	0/-0.3	C0.3	C0.3
DM101615	DM101615	10.0	16	H7(+0.018/0)	10.0	h7(0/-0.015)	10.0	C7(+0.095/+0.080)	16	r6(+0.034/+0.023)	15	0/-0.3	C0.3	C0.3
DM101620	DM101620	10.0	16	H7(+0.018/0)	10.0	h7(0/-0.015)	10.0	C7(+0.095/+0.080)	16	r6(+0.034/+0.023)	20	0/-0.3	C0.3	C0.3
DM121810	DM121810	12.0	18	H7(+0.018/0)	12.0	h7(0/-0.018)	12.0	C7(+0.113/+0.095)	18	r6(+0.034/+0.023)	10	0/-0.3	C0.3	C0.3
DM121815	DM121815	12.0	18	H7(+0.018/0)	12.0	h7(0/-0.018)	12.0	C7(+0.113/+0.095)	18	r6(+0.034/+0.023)	15	0/-0.3	C0.3	C0.3
DM121816	DM121816	12.0	18	H7(+0.018/0)	12.0	h7(0/-0.018)	12.0	C7(+0.113/+0.095)	18	r6(+0.034/+0.023)	16	0/-0.3	C0.3	C0.3
DM121820	DM121820	12.0	18	H7(+0.018/0)	12.0	h7(0/-0.018)	12.0	C7(+0.113/+0.095)	18	r6(+0.034/+0.023)	20	0/-0.3	C0.3	C0.3
DM121825	DM121825	12.0	18	H7(+0.018/0)	12.0	h7(0/-0.018)	12.0	C7(+0.113/+0.095)	18	r6(+0.034/+0.023)	25	0/-0.3	C0.3	C0.3
DM121830	DM121830	12.0	18	H7(+0.018/0)	12.0	h7(0/-0.018)	12.0	C7(+0.113/+0.095)	18	r6(+0.034/+0.023)	30	0/-0.3	C0.3	C0.3
DM131915	DM131915	13.0	19	H7(+0.021/0)	13.0	h7(0/-0.018)	13.0	C7(+0.113/+0.095)	19	r6(+0.041/+0.028)	15	0/-0.3	C0.3	C0.3
DM131920	DM131920	13.0	19	H7(+0.021/0)	13.0	h7(0/-0.018)	13.0	C7(+0.113/+0.095)	19	r6(+0.041/+0.028)	20	0/-0.3	C0.3	C0.3
DM142015	DM142015	14.0	20	H7(+0.021/0)	14.0	h7(0/-0.018)	14.0	C7(+0.113/+0.095)	20	r6(+0.041/+0.028)	15	0/-0.3	C0.3	C0.3
DM142020	DM142020	14.0	20	H7(+0.021/0)	14.0	h7(0/-0.018)	14.0	C7(+0.113/+0.095)	20	r6(+0.041/+0.028)	20	0/-0.3	C0.3	C0.3
DM152115	DM152115	15.0	21	H7(+0.021/0)	15.0	h7(0/-0.018)	15.0	C7(+0.113/+0.095)	21	r6(+0.048/+0.028)	15	0/-0.3	C0.3	C0.3
DM152120	DM152120	15.0	21	H7(+0.021/0)	15.0	h7(0/-0.018)	15.0	C7(+0.113/+0.095)	21	r6(+0.048/+0.028)	20	0/-0.3	C0.3	C0.3
DM152125	DM152125	15.0	21	H7(+0.021/0)	15.0	h7(0/-0.018)	15.0	C7(+0.113/+0.095)	21	r6(+0.048/+0.028)	25	0/-0.3	C0.3	C0.3
DM162215	DM162215	16.0	22	H7(+0.021/0)	16.0	h7(0/-0.018)	16.0	C7(+0.113/+0.095)	22	r6(+0.041/+0.028)	15	0/-0.3	C0.3	C0.3
DM162216	DM162216	16.0	22	H7(+0.021/0)	16.0	h7(0/-0.018)	16.0	C7(+0.113/+0.095)	22	r6(+0.041/+0.028)	16	0/-0.3	C0.3	C0.3
DM162220	DM162220	16.0	22	H7(+0.021/0)	16.0	h7(0/-0.018)	16.0	C7(+0.113/+0.095)	22	r6(+0.041/+0.028)	20	0/-0.3	C0.3	C0.3
DM162225	DM162225	16.0	22	H7(+0.021/0)	16.0	h7(0/-0.018)	16.0	C7(+0.113/+0.095)	22	r6(+0.041/+0.028)	25	0/-0.3	C0.3	C0.3
DM162230	DM162230	16.0	22	H7(+0.021/0)	16.0	h7(0/-0.018)	16.0	C7(+0.113/+0.095)	22	r6(+0.041/+0.028)	30	0/-0.3	C0.3	C0.3
DM162235	DM162235	16.0	22	H7(+0.021/0)	16.0	h7(0/-0.018)	16.0	C7(+0.113/+0.095)	22	r6(+0.041/+0.028)	35	0/-0.3	C0.3	C0.3
DM182415	DM182415	18.0	24	H7(+0.021/0)	18.0	h7(0/-0.018)	18.0	C7(+0.113/+0.095)	24	r6(+0.041/+0.028)	15	0/-0.3	C0.5	C0.5
DM182420	DM182420	18.0	24	H7(+0.021/0)	18.0	h7(0/-0.018)	18.0	C7(+0.113/+0.095)	24	r6(+0.041/+0.028)	20	0/-0.3	C0.5	C0.5
DM182425	DM182425	18.0	24	H7(+0.021/0)	18.0	h7(0/-0.018)	18.0	C7(+0.113/+0.095)	24	r6(+0.041/+0.028)	25	0/-0.3	C0.5	C0.5

Additional Information

Не се поддържат бисквитки на трети страни

DM Series