Series L - Veith

??

Селекция на CAD модел

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Списък на материалите	CODICE Code ⁿ/ₐ	DH Hole diameter [mm]	DD Rod diameter [mm]	LO Free length [mm]	RG Rate /±10% [N/mm]	FX Force [N]	PX Use % of SN [%]	LX Length at compression end [mm]	S1 Recommended working deflection for long spring life [mm]	F1 Force [N]	S2 Recommended working deflection for medium spring life [mm]	F2 Force [N]	SN Maximum operating deflection [mm]	FN Force [N]	MAT Material ⁿ/ₐ	D Cross wire section [mm]	DE Approx. spring outside diameter [mm]

		L3-010	L3-010	3	2	10	2.94	0.000	0.000	10.000	1.6	4.4	2.4	6.7	3.2	8.8	Cr-Si	0.4	2.98
		L3-015	L3-015	3	2	15	1.96	0.000	0.000	15.000	2.4	4.4	3.6	6.7	4.8	8.8	Cr-Si	0.4	2.98
		L3-020	L3-020	3	2	20	0.98	0.000	0.000	20.000	3.2	4.4	4.8	6.7	6.4	8.8	Cr-Si	0.4	2.98
		L3-025	L3-025	3	2	25	0.98	0.000	0.000	25.000	4	4.4	6	6.7	8	8.8	Cr-Si	0.4	2.98
		L4-010	L4-010	4	2.6	10	4.9	0.000	0.000	10.000	1.6	7.9	2.4	11.8	3.2	8.8	Cr-Si	0.6	3.98
		L4-015	L4-015	4	2.6	15	2.94	0.000	0.000	15.000	2.4	7.9	3.6	11.8	4.8	8.8	Cr-Si	0.6	3.98
		L4-020	L4-020	4	2.6	20	2.94	0.000	0.000	20.000	3.2	7.9	4.8	11.8	6.4	8.8	Cr-Si	0.6	3.98
		L4-025	L4-025	4	2.6	25	1.96	0.000	0.000	25.000	4	7.9	6	11.8	8	8.8	Cr-Si	0.6	3.98
		L4-030	L4-030	4	2.6	30	1.96	0.000	0.000	30.000	4.8	7.9	7.2	11.8	9.6	8.8	Cr-Si	0.6	3.98
		L6-015	L6-015	6	4	15	7.85	0.000	0.000	15.000	2.4	17.7	3.6	26.5	4.8	35.3	Cr-Si	0.9	5.97
		L6-020	L6-020	6	4	20	5.88	0.000	0.000	20.000	3.2	17.7	4.8	26.5	6.4	35.3	Cr-Si	0.9	5.97
		L6-025	L6-025	6	4	25	4.9	0.000	0.000	25.000	4	17.7	6	26.5	8	35.3	Cr-Si	0.9	5.97
		L6-030	L6-030	6	4	30	3.92	0.000	0.000	30.000	4.8	17.7	7.2	26.5	9.6	35.3	Cr-Si	0.9	5.97
		L6-035	L6-035	6	4	35	2.94	0.000	0.000	35.000	5.6	17.7	8.4	26.5	11.2	35.3	Cr-Si	0.9	5.97
		L8-015	L8-015	8	5.4	15	12.75	0.000	0.000	15.000	2.4	31.4	3.6	47.1	4.8	62.8	Cr-Si	1.2	7.96
		L8-020	L8-020	8	5.4	20	9.81	0.000	0.000	20.000	3.2	31.4	4.8	47.1	6.4	62.8	Cr-Si	1.2	7.96
		L8-025	L8-025	8	5.4	25	7.85	0.000	0.000	25.000	4	31.4	6	47.1	8	62.8	Cr-Si	1.2	7.96
		L8-030	L8-030	8	5.4	30	6.86	0.000	0.000	30.000	4.8	31.4	7.2	47.1	9.6	62.8	Cr-Si	1.2	7.96
		L8-035	L8-035	8	5.4	35	5.88	0.000	0.000	35.000	5.6	31.4	8.4	47.1	11.2	62.8	Cr-Si	1.2	7.96
		L8-040	L8-040	8	5.4	40	4.9	0.000	0.000	40.000	6.4	31.4	9.6	47.1	12.8	62.8	Cr-Si	1.2	7.96
		L10-025	L10-025	10	6.5	25	12.75	0.000	0.000	25.000	4	49	6	73.6	8	98.1	Cr-Si	1.5	9.92
		L10-030	L10-030	10	6.5	30	9.81	0.000	0.000	30.000	4.8	49	7.2	73.6	9.6	98.1	Cr-Si	1.5	9.92
		L10-035	L10-035	10	6.5	35	8.83	0.000	0.000	35.000	5.6	49	8.4	73.6	11.2	98.1	Cr-Si	1.5	9.92
		L10-040	L10-040	10	6.5	40	7.85	0.000	0.000	40.000	6.4	49	9.6	73.6	12.8	98.1	Cr-Si	1.5	9.92
		L10-045	L10-045	10	6.5	45	6.86	0.000	0.000	45.000	7.2	49	10.8	73.6	14.4	98.1	Cr-Si	1.5	9.92

Additional Information

Потребителите, които са гледали това, също се интересуват

N 277.1 Ejector pin, Form A, nitrated & oxidated in schwarz - Precision ejectors

N 277.1 Ejector pin, Form A, nitrated & oxidated in schwarz - Precision eje...Tecnorm 08.08.2016

Special Springs

L Ø 30Special Springs 22.05.2024

Series LVeith 08.10.2009

DIN 472 - Retaining rings for bores

DIN 472 - Retaining rings for boresFabory 13.02.2023

241.02. - Round wire compression spring

241.02. - Round wire compression springFIBRO 21.07.2023

1412. Fine blanking punch, form D - Cutting elements

1412. Fine blanking punch, form D - Cutting elementsTecnorm 05.10.2016

Torsion Spring - Torsion Spring

Torsion Spring - Torsion SpringFebrotec 30.03.2022

R0171 - Internal seeger ring - SEEGERDIN472

R0171 - Internal seeger ring - SEEGERDIN472PlaSteel 17.06.2021

R0170 - Exterrnal seeger ring - SEEGERDIN471

R0170 - Exterrnal seeger ring - SEEGERDIN471PlaSteel 17.06.2021

LAT 2 - Frontal Lock

LAT 2 - Frontal LockPlaSteel 17.06.2021

07331 - Circlips for bores DIN 472

07331 - Circlips for bores DIN 472norelem 30.05.2024

Special Springs

L Ø 6Special Springs 22.05.2024

Straight reduction coupling with sealing cone, L-series, ISO 8431-1-RDSW - Tube connection according to DIN 2353 / ISO 8434-1, sealing cone matched to the hole shape W DIN 3861 / ISO 8434-1

Straight reduction coupling with sealing cone, L-series, ISO 8431-1-RDSW - ...VOSS 11.04.2023

Straight reduction coupling, L-series, ISO 8434-1-RDS - Tube connector on both sides according to DIN 2353 / ISO 8434-1

Straight reduction coupling, L-series, ISO 8434-1-RDS - Tube connector on b...VOSS 11.04.2023